Tag Archives: arm

MediaDeb: Debian For Mediatek Cellphones

In this small note I’ll tell you how to turn an old MediaTek SoC-based cellphone,(The one that’s probably gathering dust somewhere on your shelf, with no updates from vendor) into… a server running Debian Stretch! I’ve done this for UMI-X2 and iOcean X8 and you can download ready to flash firmware for these devices at the bottom of this post. Since a typical Chinese mtk cellphone now features 2GB or more RAM and 4 or more ARM cores the result packs way more performance than a typical Raspberry PI.

Continue reading MediaDeb: Debian For Mediatek Cellphones

Debian @ Dlink DNS-327L: The guide

If you’re following my blog, you might’ve read my post about Dlink’s substandard engineering, and how I’ve got debian running on the damn thing. Well, since that time I’ve made a few improvements, namely:

  • Power button’s now correctly rigged as well as the rest of the buttons.
  • Upstream 3.18, 3.19 kernels now works flawlessly and don’t ever freeze. I update kernels with each new kernel release
  • Goodies like Marvell’s DMA engine, mv_xor, watchdog and mv_cesa are all enabled for the win and are working awesomely
  • There’s now a huge guide about ‘cooking’ the damned thing into a useable state in five easy steps. And you are reading it.
  • Power measurements are all there as well!

BIG FAT WARNING: I take no whatsoever responsibility if you screw up your device following these instructions. Proceed at your own risk, use your own head. This will also void warranty, btw.

IMG_20150215_141546

Continue reading Debian @ Dlink DNS-327L: The guide